Test Instruments
TIS360 AUTO RANGING SAFETY MULTIMETER £55.00 TIS760 SAFETY MULTIFUNCTION METER £75.00 TIS415 MOTOR/PHASE ROTATION TESTER (CARRIES OUT THE REQUIREMENTS OF THE 17TH EDITION, FOR PHASE SEQUENCE INDICATION AND MUCH MORE.) £75.00 TIS UM1 LASER MEASURE (MEASUREMENT OF HEIGHT, WIDTH AND DEPTH OF A ROOM.) £5.00
PLEASE ORDER FROM BEMCO GLASGOW
BS 7671 2008 17th Edition of the Wiring Regulations Test Instrument Solutions Have introduced the TIS 415 Which carries out the requirements of the 17th Edition, for phase sequence indication and much more. The instrument determines the phase sequence of three phase systems and the rotational direction of three phase motors, using non-contact and or contact technology Phase Sequence Motor Rotation – Non-Contact Motor Rotation – Contact The TIS 415 is supplied complete with test leads, crocodile clips and a padded carrying case with a shoulder strap. PLEASE ORDER FROM BEMCO GLASGOW
Offers on our Range of Test Instrument Solutions
View Flyer
Tel. 0141 647 9271 Fax 0141 647 7245
All prices subject to VAT at 20% and are while stocks last.
E-mail:-
This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
“612.12 Check of phase sequence indication
for multiphase circuits, it shall be verified that the phase sequence is maintained” (section 612 Testing, page 161 of the 17th Edition)
Simply connect the TIS 415, using the test leads, to L1, L2 and L3, the instrument will indicate the field of phase sequence
Place the TIS 415 on top of the motor with the base of the instrument facing the shaft of the motor, press the test button, the green light will illuminate, and the instrument will detect the magnetic field and display the field of motor rotation
Connect the TIS 415, using the test leads to T1, T2 and T3 of the motor, press the test button and turn the motor shaft a quarter turn to the right and the instrument will display the field of motor rotation
£75.00
View Flyer
Tel. 0141 647 9271 Fax 0141 647 7245
All prices subject to VAT at 20% and are while stocks last.
E-mail:-
This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
17TH EDITION WIRING REGS BOOKS.
NOW IN STOCK
£75.00 EACH VAT FREE
PLEASE ORDER FROM BEMCO GLASGOW
Free local delivery otherwise add £7.50 carriage.
All prices subject to VAT at 20% and are while stocks last.
E-mail:-
This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
17th Edition “all in one” / Multi Test Meters
Special Offer on Metrel / Alphatek instruments while stocks last...
Available exclusively from Bemco Glasgow.
Delivery will be carriage paid.
Contact Us on 0141 647 9271
MI3125 EurotestCOMBO LITE
OUR REPLACEMENT FOR THE EVER POPULAR EASITEST METER.
- PERFORMS ALL OF THE BS7671:2008, 17TH EDITION AND BSEN61557-2 TESTS.
- WILL SATISFY THE NEW BUILDING REGS PART P.
- LOOP TEST, PSC TEST, RCD TEST, INSULATION TEST.
- INSULATION TEST 50v to 1000V
- CONTINUITY TEST R1 AND R2
- 3-YEAR GUARANTEE
- VOLTAGE PROTECTED ON ALL RANGES
- LARGE CLEAR LCD DISPLAY.
- WILL NOT TRIP RCD’S WHEN LOOP TESTING.
- THE 1ST “ALL IN ONE” TESTER THAT USES RE-CHARGEABLE BATTERIES AND COMES C/W THE BUILT-IN CHARGER.
- AUTO POWER OFF
- PHASE ROTATION
- POLARITY TEST
- FREQUENCY TEST
- RCD RAMP TEST
- INSULATION RANGE UP TO 1000MΩ
- FREE NATIONWIDE DELIVERY VIA PARCELFORCE OR OUR VAN
Price: £379.00
View Flyer
Tel. 0141 647 9271 Fax 0141 647 7245
PLEASE ORDER FROM BEMCO GLASGOW
All prices subject to VAT at 20% and are while stocks last.
E-mail:-
This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
Special Offer - MI3311 GammaPAT LITE
(ENTRY LEVEL PORTABLE APPLIANCE TESTER)
- Very quick and simple to use.
- Pass/Fail of all tests, preset by tester.
- Earth continuity resistance.
- Insulation resistance
- IEC cord polarity test.
- Voltage TRMS meter
- Pre – programmed test sequences
- Simple autotests
- Can be used with a bar code reader. ref A1105
- Can upgrade meter at a later date with addition of software.
- Built in PAT CHECK BOX which ensures meter always reads correctly.
- Battery powered with internal battery charger.
- Help screens
- Autosequences
- IEC cable 1.8mtr
- Red test probe
- Red test lead , 1.5mtr
- Red crocodile clip
- Power supply adaptor
- 6 x AA NiMH batteries
- Small soft carry case
- Cal cert and instruction booklet.
£345.00 + vat
- Optional software upgrade via PC SW PAT link PRO with USB and RS232-PS/2 cable.
£130.00 + vat
Special offer on metrel/alphatek pat instruments while stocks last
Special offer on metrel/alphatek pat instruments while stocks last
AVAILABLE EXCLUSIVELY FROM BEMCO GLASGOW.
CALL US NOW ON 0141 647 9271
Mi2143 autopat (entry level portable appliance tester)
Very quick and simple to use.
Pass/fail of all tests, preset by tester.
Tests all equipment, including i.t.
110v, 230v and 415v.
Built in buzzer and timer for all tests.
Individual pass/fail indicated by led.
C/w rugged carry bag and cal cert.
Price: £250.00
Mi2142 alphapat (simple portable appliance tester)
As simple as 1,2,3.just enter a 3 digit code, the alphapat will preset the test and pass/fail parameters.press start and leave the rest to alphapat.
Stores 2000 test results.
Tests all it and iec cords.
Downloads in less than 5 minutes.
230v and 415v. Rugged carry case
Price £499.00